ISO - International Organization for Standardization for Fasteners
These are various ISO standards related to fasteners, bolts, screws, and other types of mechanical components. Here's a brief description of each standard:
-
ISO 10511: This standard specifies the requirements for hexagon nuts with metric coarse and fine pitch thread.
-
ISO 10512: This standard specifies the requirements for taps for internal threads with metric dimensions.
-
ISO 7040: This standard specifies the requirements for prevailing torque type hexagon nuts (with non-metallic insert).
-
ISO 10513: This standard specifies the requirements for taps for internal threads with inch dimensions.
-
ISO 7042: This standard specifies the requirements for hexagon head screws with metric dimensions and thread pitch.
-
ISO 21670: This standard specifies the requirements for metric series bolts with reduced shank and pilot bore.
-
ISO 4034: This standard specifies the requirements for hexagon nuts, style 1, with metric dimensions and property classes.
-
ISO 8674: This standard specifies the requirements for hexagon head screws with metric fine pitch thread.
-
ISO 8673: This standard specifies the requirements for hexagon head screws with metric coarse pitch thread.
-
ISO 4032: This standard specifies the requirements for hexagon nuts, style 2, with metric dimensions and property classes.
-
ISO 7047: This standard specifies the requirements for countersunk flat head screws with cross recess.
-
ISO 7046: This standard specifies the requirements for countersunk flat head screws with hexagon socket.
-
ISO 2010: This standard specifies the requirements for hexagon nuts with metric fine pitch thread and mechanical properties.
-
ISO 2009: This standard specifies the requirements for hexagon bolts with metric fine pitch thread.
-
ISO 8676: This standard specifies the requirements for hexagon head screws with inch dimensions.
-
ISO 8765: This standard specifies the requirements for hexagon nuts, style 1, with inch dimensions and property classes.
-
ISO 2339: This standard specifies the dimensions of taper pins.
-
ISO 7089: This standard specifies the requirements for plain washers with metric dimensions.
-
ISO 7090: This standard specifies the requirements for plain washers with inch dimensions.
-
ISO 7091: This standard specifies the requirements for plain washers with chamfer, with metric and inch dimensions.
-
ISO 8738: This standard specifies the dimensions for grooved pins.
-
ISO 2340: This standard specifies the dimensions of straight pins.
-
ISO 2341: This standard specifies the dimensions of cylindrical pins with internal thread.
-
ISO 8739: This standard specifies the dimensions for parallel pins.
-
ISO 8744: This standard specifies the dimensions for split pins.
-
ISO 8745: This standard specifies the dimensions for grooved pins with round head.
-
ISO 8740: This standard specifies the dimensions for parallel pins with internal thread.
-
ISO 8741: This standard specifies the dimensions for parallel pins with internal thread and full length taper.
-
ISO 8742: This standard specifies the dimensions for grooved pins with internal thread.
-
ISO 8746: This standard specifies the dimensions for grooved pins with round head and centre hole.
-
ISO 8747: This standard specifies the dimensions for grooved pins with internal thread and full length taper.
-
ISO 8752: This standard specifies the dimensions for spring-type straight pins.
These standards are useful for manufacturers and designers to ensure that their products meet industry standards and are compatible with other components