1. DIN 1 - ISO general purpose metric screw threads - Basic dimensions.
2. DIN 125 - Flat washers for metric bolts.
3. DIN 126 - Flat washers for use with clevis pins and shafts.
4. DIN 127 - Spring lock washers.
5. DIN 128 - Spring washers with square ends.
6. DIN 137 - Spring washers, curved.
7. DIN 1440 - Round washers for clevis pins and shafts.
8. DIN 1443 - Round washers for eye bolts.
9. DIN 1444 - Clevis pins with head and threaded pin.
10. DIN 1470 - Clevis pins without head.
11. DIN 1471 - Grooved pins, full length parallel grooved, with pilot.
12. DIN 1472 - Grooved pins, half length parallel grooved, with pilot.
13. DIN 1473 - Grooved pins, full length taper grooved, with pilot.
14. DIN 1474 - Grooved pins, half length taper grooved, with pilot.
15. DIN 1475 - Grooved pins, full length parallel grooved, without pilot.
16. DIN 1476 - Grooved pins, half length parallel grooved, without pilot.
17. DIN 1477 - Grooved pins, full length taper grooved, without pilot.
18. DIN 1481 - Slotted spring pins, heavy duty.
19. DIN 1587 - Hexagon domed cap nuts.
20. DIN 1816 - Hexagon head bolts with shank, low head.
1. DIN 315 - Wing screws with rounded wings.
2. DIN 316 - Wing screws with straight wings.
3. DIN 404 - Hexagon head bolts with reduced shank.
4. DIN 417 - Wing nuts.
5. DIN 427 - Slotted cheese head screws.
6. DIN 428 - Square head bolts.
7. DIN 433 - Flat washers, small series.
8. DIN 433-1 - Flat washers, small series, with chamfer.
9. DIN 433-2 - Flat washers, small series, with small inside diameter.
10. DIN 438 - Taper pins, unhardened.
11. DIN 439 - Hexagon thin nuts.
12. DIN 440 - Round head rivets.
13. DIN 444 - Eye bolts.
14. DIN 462 - Slotted set screws with flat point.
15. DIN 464 - Knurled thumb screws.
16. DIN 466 - Knurled nuts.
17. DIN 467 - Knurled nuts with collar.
18. DIN 471 - External retaining rings for shafts.
19. DIN 479 - Square head bolts with short thread.
20. DIN 5406 - Retaining rings for shafts.
21. DIN 548 - T-slots for bolts.
22. DIN 551 - T-head bolts.
33. DIN 553 - T-slot bolts.
24. DIN 555 - Hexagon head bolts with thread up to the head.
25. DIN 558 - Hexagon head bolts with shank.
26. DIN 580 - Eye bolts.
27. DIN 601 - Hexagon head bolts with nut.
28. DIN 603 - Mushroom head square neck bolts.
29. DIN 609 - Hexagon fit bolts with reduced shank.
30. DIN 6319 - Flat washers for clevis pins.
31. DIN 6325 - Taper pins, hardened.
32. DIN 6340 - Washers for T-slots.
33. DIN 653 - Slotted countersunk head wood screws.
34. DIN 6797 - External tooth lock washers.
35. DIN 6798 - Internal tooth lock washers.
36. DIN 6799 - Spring lock washers.
37. DIN 6900 - Metric bolt and nut assemblies, coarse pitch thread.
38. DIN 6901 - Metric bolt and nut assemblies, fine pitch thread.
39. DIN 6902 - Hexagon fit bolts with small head.
40. DIN 6903 - Hexagon fit bolts with dog point.
41. DIN 6912 - Hexagon socket head cap screws with low head.
42. DIN 6914 - Hexagon head bolts with large widths across flats for steel structures.
43. DIN 6916 - Heavy hexagon nuts for structural bolting.
44. DIN 6921 - Hexagon flange bolts.
45. DIN 6922 - Hexagon socket button head screws.
46. DIN 6923 - Hexagon flange nuts with non-metallic insert.
47. DIN 6924 - Hexagon flange nuts with small flange.
48. DIN 6925 - Hexagon nut with flange and with non-metallic insert.
49. DIN 6926 - Hexagon nut with flange and with metallic insert.
50. DIN 6927 - Hexagon thin nuts with small widths across flats.
51. DIN 7045 - Pan head tapping screws.
52. DIN 7337 - Blind rivets.
53. DIN 7343 - Split lock washers for screws with cylindrical heads.
54. DIN 7344 - Split lock washers for screws with conical heads.
55. DIN 7346 - Spring lock washers for screws with cylindrical heads.
56. DIN 7349 - Spring lock washers for screws with conical heads.
57. DIN 7500 - Thread-forming screws for metal.
58. DIN 988 - Shim rings.
59. DIN 980 - Prevailing torque type hexagon nuts (with non-metallic insert).
60. DIN 981 - Prevailing torque type hexagon nuts (with metallic insert).
61. DIN 982 - Prevailing torque type hexagon nuts (with non-metallic insert).
62. DIN 983 - Prevailing torque type hexagon nuts (with metallic insert).
63. DIN 984 - ISO metric trapezoidal screw threads - gauging of external and internal threads.
64. DIN 985 - Hexagon nuts with non-metallic insert (style 1) - with metric fine pitch thread.
65. DIN 986 - Hexagon nuts with non-metallic insert (style 2) - with metric fine pitch thread.
66. DIN 971 - Hexagon nuts with coarse pitch thread - small series.
67. DIN 972 - Hexagon nuts with fine pitch thread - small series.
68. DIN 975 - Threaded rods.
69. DIN 976 - Studs.
70. DIN 977 - Slotted set screws with flat point.
71. DIN 979 - Slotted set screws with cone point.
22. DIN 960 - Hexagon head bolts - product grade A and B.
73. DIN 961 - Hexagon head bolts - product grade C.
74. DIN 962 - Cross recessed raised countersunk (oval) head tapping screws.
75. DIN 963 - Slotted raised countersunk (oval) head tapping screws.
76. DIN 964 - Cross recessed countersunk (flat) head tapping screws.
77. DIN 965 - Slotted countersunk (flat) head tapping screws.
78. DIN 966 - Cross recessed raised countersunk (flat) head tapping screws.
79. DIN 970 - Hexagon head bolts - product grade A and B.
80. DIN 94 - Split pins.
81. DIN 95 - Cotter pins.
82. DIN 96 - Taper pins.
83. DIN 937 - Cotter pins with double loops.
84. DIN 938 - Studs with unequal thread lengths.
85. DIN 939 - Studs with equal thread lengths.
86. DIN 935 - Hexagon castle nuts.
87. DIN 934 - Hexagon nuts with metric coarse and fine pitch thread.
88. DIN 933 - Hexagon head bolts with metric coarse and fine pitch thread.
89. DIN 931 - Hexagon head bolts with metric coarse and fine pitch thread.
90. DIN 930 - Hexagon nuts with metric coarse pitch thread.
91. DIN 93 - Split pins.
92. DIN 921 - Slotted pan head screws.
93. DIN 923 - Slotted cheese head screws.
94. DIN 929 - Hexagon weld nuts.
95. DIN 911 - Hexagon head screws with threaded shaft.
96. DIN 912 - Hexagon socket head cap screws.
97. DIN 913 - Slotted flat point set screws.
98. DIN 914 - Hexagon socket set screws with flat point.
99. DIN 915 - Slotted countersunk (flat) head screws.
100. DIN 916 - Hexagon socket set screws with cup point.
101.DIN 918 specifies a type of slotted set screw with a flat point and a chamfered end.
102.DIN 910 specifies a type of hexagon socket pipe plug made of brass or steel, used for closing the end of a pipe.
103.DIN 908 specifies a type of hexagon socket screw plug made of brass or steel, used to seal threaded holes.
104.DIN 9021 specifies a type of flat washer with a larger outer diameter than standard DIN 125 washers, used to distribute load over a larger surface area.
105.DIN 85 specifies a type of slotted cheese head screw with a thread up to the head, used in applications where a low profile is required.
106.DIN 84 specifies a type of slotted pan head screw with a thread up to the head, used in applications where a low profile is required.
107.DIN 7991 specifies a type of countersunk flat head screw with a hexagon socket drive, used when a flush surface is required.
108.DIN 7989 specifies a type of washer with a larger outer diameter than standard DIN 125 washers, used to distribute load over a larger surface area.
109.DIN 7981 specifies a type of pan head tapping screw with a cross recessed drive, used for fastening thin materials.
110.DIN 7982 specifies a type of countersunk flat head tapping screw with a cross recessed drive, used for fastening thin materials.
111.DIN 7983 specifies a type of pan head tapping screw with a cross recessed drive and a sharp point, used for fastening thin materials.
112.DIN 7984 specifies a type of hexagon socket head cap screw with a low head height, used in applications where a low profile is required.
113.DIN 7985 specifies a type of pan head screw with a Phillips drive, used in a variety of applications.
114.DIN 7970 specifies a type of spring washer with a curved surface, used to provide additional tension to a joint.
115.DIN 7971 specifies a type of pan head screw with a Phillips drive and a serrated thread, used for fixing sheet metal to timber.
116.DIN 7972 specifies a type of countersunk flat head screw with a Phillips drive, used for fixing sheet metal to timber.
117.DIN 7973 specifies a type of pan head screw with a Phillips drive and a sharp point, used for fixing sheet metal to timber.
118.DIN 7977 specifies a type of washer with a serrated surface, used to prevent loosening of a joint.
119.DIN 7978 specifies a type of washer with teeth on the inner diameter, used to prevent loosening of a joint.
120.DIN 7979 specifies a type of washer with a stepped outer diameter, used to distribute load over a larger surface area.
121.DIN 7980 specifies a type of hexagon flange nut with a non-metallic insert, used in applications where a vibration-resistant joint is required.